Videos

Welcome to X-Edge Tools! In this behind-the-scenes tour, we’re opening our doors and giving you an inside look at how we design, assemble, test, and ship the industry’s most trusted CNC router bits, diamond polishing tools, carbide knives, and specialty accessories.

Whether you’re a shop owner, CNC operator, sign maker, fabricator, or just curious how precision tooling is made, you’ll love this walkthrough of our workflow, equipment, and team in action.

Diamond polishing 1" thick acrylic with X-Edge XPT-101014 MCD Diamond tool

Boost Your CNC Vacuum Hold Down with the X-Edge Matrix Mat!
Stop fighting with clamps and tape—the X-Edge Matrix Mat is a game-changer for CNC vacuum tables.

Not only does it act as a sacrificial mat to protect your spoilboard, but its real power is in dramatically increasing vacuum hold-down capabilities—multiplying your hold-down force several times over. Perfect for keeping even the smallest parts from lifting or shifting during cutting.

✅ Protects your spoilboard
✅ Maximizes vacuum hold-down force
✅ Eliminates the need for clamping or taping
✅ Keeps small parts stable during cuts

This is an absolute must-have for every CNC shop. If you’re serious about precision, you need the Matrix Mat on your table today!

Here's the process:
60 degree V-CARVE Series ENGRAVE -P/N XIV6012 Used to engrave the company logos (150ipm @ 20,000RPM)
120 degree V-CARVE Series ENGRAVE -P/N XIV12012 Used to engrave the word MUSEUM (50ipm @ 18,000RPM)
1/2 CHAMFER Series ENGRAVE -P/N XCH2044 Used to put the V chamfer border around the perimeter of the emblem ( 200ipm @ 15,000RPM)
3/8 VIPER Series End Mill POCKETING -P/N XV2033 Used to do a spiral fill on the emblem and the days and times (200ipm @ 22,000RPM 65% overlap)
1/8 VIPER Series POCKETING -P/N XV2030-S Used to do a spiral fill on the emblem and the days and times (200ipm @ 22,000RPM 65%)
1/16 OMEGA Series POCKETING -P/N XO2009 Used to do a spiral fill on the emblem and the days and times (125ipm @ 22,000RPM)
3/8 RAZOR Series End Mill CUT OUT -P/N XR2063-CB Used to do the cut out ( first pass 800ipm @ 22,000RPM 2nd pass 200ipm @ 22,000RPM)

Check out the full demonstration here: https://youtu.be/jdzyiMhuUFE?si=L2MjGdZGnsI_J0Rg

Another batch of #XVO2232 aluminum cutters fresh off the grinder🔥🔥For 3003 aluminum, when used with our proprietary alcohol-based cooling fluid #XL001, these single flute high polished bits can't be matched. See the entire Viper "O" line at https://www.xedgetools.com/

This quick look inside our grinding process shows how X-Edge tools are refined to perfection — because performance starts with preparation.
https://www.xedgetools.com/

At X-Edge, we love to do things a little different. One of the ways is that we don't follow the old, worn out chip load calculator. Our recomended feeds and speeds are based on real life testing, and pushing past what is considered the industry norm. (Did you know that you can cut Sintra at 1000IPM?? Probably not!) Our dynamic Feeds and Speeds tool will walk you through each element of the process and recommend the best tool based on diameter, material, edge preference, and spindle horsepower. You can also email the recommendations to yourself to build your own F/S database. Check it out here: https://www.xedgetools.com/feeds-speeds/

Keep Cutting While You Polish | X-Edge Diamond Polisher

Why tie up your CNC? The X-Edge Diamond Polisher runs separately, letting your CNC router stay focused on cutting while your edges get a crystal-clear finish.

Smooth, polished acrylic edges
Standalone post-processing solution
Maximize efficiency, increase your output

Correct tool installation isn’t optional — it’s essential.

In this instructional video, we walk you through the proper technique for tightening router bits into collets using a torque wrench and changing station. This process ensures your tools are secured with the exact amount of torque, preventing costly mistakes, tool wear, and safety risks.

Learn how to:
Secure tools safely using a changing station
Apply precise torque for optimal grip
Protect your spindle, tooling, and material
Reduce vibration and extend tool life

Using the right torque isn’t just best practice — it’s critical for ensuring operator safety and maintaining precision in your CNC work.

Pro tip: Over- or under-tightening can lead to tool slippage, broken bits, or damaged collets. Don’t guess — torque it right.
Learn more: https://www.xedgetools.com/product-category/accessories/torque-wrench-wrench-stations/